What are the different scales used in a bench top hardness tester?

Jan 14, 2026Leave a message

Hey there! As a supplier of bench top hardness testers, I often get asked about the different scales used in these nifty machines. So, I thought I'd take a moment to break it down for you.

First off, let's understand what a bench top hardness tester is. It's a device that measures the hardness of a material. Hardness is basically how resistant a material is to being indented or scratched. And different materials need different scales to accurately measure their hardness.

Rockwell Scale

One of the most commonly used scales in bench top hardness testers is the Rockwell scale. It's super popular because it's quick and easy to use, and it can measure a wide range of materials. The Rockwell scale works by applying a minor load first, followed by a major load. The difference in depth of the indentation made by the two loads is what determines the hardness value.

There are several Rockwell scales, each designed for different types of materials. For example, the Rockwell C scale (HRC) is used for hard materials like hardened steels and carbides. The Rockwell B scale (HRB) is used for softer materials such as aluminum alloys and annealed steels.

Manual Digital Rockwell Diamond Indenter For Hardness TesterNew Products Of HR-150A Ⅰ Rockwell Hardness Tester

If you're interested in a Rockwell hardness tester, we have some great options. Check out our Manual HR - 150A Rockwell Hardness Tester. It's a reliable and cost - effective choice for many applications. And if you're looking for something new, our New Products Of HR - 150A Ⅰ Rockwell Hardness Tester come with some cool features and improvements.

Brinell Scale

Another important scale is the Brinell scale. The Brinell hardness test involves pressing a hard, spherical indenter (usually made of tungsten carbide) into the material under a specific load for a set period of time. The diameter of the indentation left on the material is then measured, and this measurement is used to calculate the Brinell hardness number (BHN).

The Brinell scale is great for measuring the hardness of large, thick - sectioned materials, especially those with a coarse or heterogeneous structure. It's often used in the automotive and aerospace industries for testing things like engine blocks and aircraft components.

Vickers Scale

The Vickers scale is similar to the Brinell scale in that it also measures the size of an indentation. However, instead of a spherical indenter, the Vickers test uses a square - based pyramid indenter. The Vickers hardness test is very accurate and can be used on a wide variety of materials, from very soft to very hard.

One of the advantages of the Vickers scale is that it can be used to measure the hardness of small areas or thin films. This makes it popular in the electronics and micro - manufacturing industries.

Knoop Scale

The Knoop scale is a variation of the Vickers scale. It uses an elongated, diamond - shaped indenter. The Knoop test is particularly useful for measuring the hardness of brittle materials or materials with a high elastic modulus. It's also great for testing thin layers or coatings because the long, narrow indentation it creates allows for more precise measurements on small areas.

Shore Scale

The Shore scale is used mainly for measuring the hardness of elastomers, rubbers, and plastics. There are different Shore scales, such as Shore A and Shore D. The Shore A scale is used for softer rubbers and elastomers, while the Shore D scale is used for harder plastics and rigid rubbers.

The Shore hardness test works by applying a spring - loaded indenter to the material and measuring the depth of penetration. It's a quick and simple test that can be done directly on the product without the need for sample preparation.

Mohs Scale

The Mohs scale is a qualitative scale that ranks minerals based on their scratch resistance. It's not typically used in bench top hardness testers in the same way as the other scales we've discussed, but it's still an important concept in the world of materials science.

The Mohs scale ranges from 1 (talc, the softest mineral) to 10 (diamond, the hardest mineral). While it's not as precise as the other scales for engineering applications, it can give you a general idea of a material's relative hardness.

Choosing the Right Scale

So, how do you choose the right scale for your bench top hardness tester? Well, it depends on the type of material you're testing. If you're working with metals, the Rockwell, Brinell, or Vickers scales are usually good choices. For plastics and rubbers, the Shore scale is more appropriate. And if you're dealing with minerals or gemstones, the Mohs scale might be useful.

It's also important to consider the size and shape of the material, as well as the required level of accuracy. For example, if you're testing a small, delicate part, the Vickers or Knoop scales might be better suited because they can measure hardness on small areas.

Our Digital Rockwell Hardness Tester

We also offer a Digital Rockwell Hardness Tester. This tester comes with a digital display, which makes it easier to read and record the hardness values. It also has some advanced features like data storage and statistical analysis, which can be very useful for quality control and research purposes.

Conclusion

In conclusion, there are several different scales used in bench top hardness testers, each with its own advantages and applications. Whether you're in the manufacturing, aerospace, automotive, or any other industry that requires accurate hardness testing, choosing the right scale and the right tester is crucial.

If you're in the market for a bench top hardness tester or have any questions about which scale is best for your needs, don't hesitate to get in touch. We're here to help you make the right choice and ensure that you get the most accurate and reliable hardness measurements for your materials. Contact us today to start the purchasing and negotiation process!

References

  • ASTM International standards for hardness testing
  • "Materials Science and Engineering: An Introduction" by William D. Callister Jr. and David G. Rethwisch
  • Various industry publications on materials testing and hardness measurement.